fbpx

E1 Electric UTV

$18,799

*
+$480 assembly
* Inc GST. For shipping cost to your local dealer click here .

Colour

Blue, Green

0
Volt Battery
0
Horsepower Motor

Locate Dealer

Find a dealer

Locate a dealership near you!
Locate Dealer

The E1 Electric UTV is one of the world’s few true 4WD electric UTV vehicles with switch selectable 2WD/4WD modes, low and high range gearing and full regenerative braking for maximum operating range.
  • Quiet and clean operation
  • Indoor and outdoor use
  • Tilt tray
  • 2500 Pound winch
  • 100% electric operation; no emissions during use

Check out the video below to see for yourself what makes E1 such an extraordinary electric UTV/Side by Side vehicle.

To get into a Crossfire E1, contact your closest authorised Crossfire dealer today.

Charging

Recharging is a breeze using the onboard DeltaQ charger. It’s simply a matter of plugging the E1 into a standard 15A wall socket and allowing a full charge time of 6-8 hours. The E1 is an exceptionally easy to use UTV with loads of power, effortless acceleration and regenerative braking, so when you brake, the engine captures the power and recharges the batteries. The range of the E1 is highly variable. Load and terrain make a difference in range of up to 70% in so we are careful with claims. Our customers report 2 days to 7 days of use in hobby farm environment.

Power and stability

The 27 HP 48 Volt AC drive train is powerful enough to handle most terrain without all the noise of a gas-powered engine. Nitrogen-assisted independent suspension and four-wheel hydraulic disk brakes will keep you in full control. The E1 is built for stability and performance.

Applications

The E1 has been very popular for hospitality, large events and tourism applications where silent operation and high speed allows the ability to access locations within the venue without disturbing guests. Extra safety equipment such as beacon may be required. The quiet and clean nature of electric operation also lends the E1 to applications security work, patrolling shopping centre car parks and working around livestock.


Councils, mining and construction companies have also been excited by the E1’s environmental credentials while still functioning as a reliable and rugged utility vehicle. The E1 can also be equipped for operation in hazardous environments and easily accommodates the fitting of common safety equipment including reflective tape, class 1 beacon, CB radio, cabin barrier and a battery isolation switch. This additional safety equipment may be need to operate in your jurisdiction. Contional registration schemens nationaly also mandate
.

Zero Emissions Vehicle (ZEV) policy

The E1 is a great fit for the Zero Emissions Vehicle (ZEV) policy being adopted by many councils and other organisations across Australia. The objectives of the ZEV policy are to:

  1. Ensure the transport requirements of Council operations are met in the most efficient, transparent, and equitable manner with the lowest possible environmental footprint.
  2. Respond to increasing evidence and global concern of the impact of vehicle emissions on human and environmental health. To continue Council’s commitment to addressing climate change and reducing local airborne emission through the purchase and operation of low emission vehicles for the light vehicle fleet, with a view to transitioning to zero emissions vehicles consistent with corporate and community ‘zero carbon’ commitments.

Learn more from your closest authorised Crossfire dealer.  Get in touch today.

Locate Dealer

Find a dealer

Locate a dealership near you!
Locate Dealer

Description

E1 Included Features:

  • 1500 kg winch
  • Roof and windshield
  • Aluminium rims
  • Turn signals
  • Seatbelts
  • Adjustable shocks
  • Tow pack
Specifications
Engine AC Induction
Displacement N/A
Power 27 HP
Torque 119 N.m
Range* 25-30*km
Drive 2WD / 4WD
Locking diffs Front only
Cooling Air
Battery system 48V dry cell Discover (more info)
Fuel capacity 260 Ah 48v
Expected lifespan under non-commercial use 550+ cycles 70% DoD (IEC 254-1 Traction Lead-Acid)
350+ cycles 100% DoD (DIN 43 539 VRLA)
Starter Electric
Ignition N/A
Transmission L-H-N-R
Bore x stroke (mm) N/A
Compression ratio N/A
Tray capacity 160 kg
Tray dimensions 1080 x 790 x 280
Steering Direct
Towing capacity 360 kg
Suspension front Dual A-Arm independent suspension
Suspension rear Dual A-Arm independent suspension
Brakes front Dual hydraulic disc and regenerative braking
Brakes rear Dual hydraulic disc and regenerative braking
Tyres front AT26 x 9-14
Tyres rear AT26 x 11-14
Dimensions (L x W x H) 2750 x 1630 x 1870 mm
Wheelbase 1860 mm
Ground clearance 254 mm
Dry weight 830 kg
Doors $POA
Roof and windshield Included
Towbar Included
Winch 1500 kg
Aluminium rims Included
Rear Seating +2 N/A
Other
Instrumentation Digital-Analog Display
Warranty
12 months up to 24 months* * If 1 month and 6 months services are performed by a Crossfire dealer, warranty is extended to 2 years. Please ensure you retain proof of service.
Battery Range Disclaimer
Battery Range Disclaimer for the Crossfire E1 Electric UTV: * The estimated range for the Crossfire E1 electric UTV is provided as a guideline only and is based on ideal driving conditions. Actual range may vary due to several factors, including but not limited to:

  1. Terrain: Hilly or rugged terrain can require more energy, thereby reducing overall range.
  2. Driving Habits: Rapid acceleration, high speeds, and frequent stops can reduce the range.
  3. Climate and Weather: Extremely cold or hot temperatures can affect battery performance and capacity. Using the UTV’s heater or air conditioning can also consume additional energy.
  4. Payload and Towing: Carrying heavy loads or towing can reduce the battery’s range.
  5. Battery Age and Health: As with all batteries, capacity can decrease over time or with extensive use, leading to reduced range.
  6. Maintenance: Not maintaining the vehicle according to recommended schedules may impact performance and range.
  7. Software/Firmware: Updates or changes to the UTV’s software/firmware might affect energy consumption and range.
  8. External Factors: Factors such as tire pressure, wind resistance, and road conditions can influence the UTV’s energy consumption.

Users should always plan their trips accordingly and consider these factors when relying on the battery’s range estimate. It’s recommended to maintain a buffer and not let the battery discharge completely. Charging options and locations should be taken into consideration, especially for longer journeys.

** Usable capacity is usually about 30% of the total lead acid battery total capacity. Information sheet is in the support section of website.

Locate Dealer

Find a dealer

Locate a dealership near you!
Locate Dealer

Additional information

Colour

Blue, Green

ATV Safety Information

ATV Safety Information guide.

DISCLAIMER: Every effort has been made to ensure that the information on this site is correct and up to date, however, Crossfire Motorcycles does not provide any warranty as to the completeness or accuracy of the information and, subject to applicable laws, does not accept any liability for damages of any kind resulting from the access or use of this site and its contents. Crossfire Motorcycles reserves the right to discontinue or change any of the models, prices, colours, materials, equipment or other specifications referred to on this site at any time without notice. Some of the equipment shown or referred to in this site may only be available as an option at extra cost. Always consult an Authorised Crossfire Motorcycles Dealer for the latest information about a Crossfire Motorcycles product, and its availability, before placing an order. All prices specified on this site are in Australian dollars. All information on this site is protected by copyright and other intellectual property rights. No images, text or other content from this site may be distributed or reproduced without prior written approval from Crossfire Motorcycles.

Title